Software-test
Arcgis PRO for Lund University staff and students Download the software
https://www.gis.lu.se/software-test - 2026-10-31
Filtyp
Arcgis PRO for Lund University staff and students Download the software
https://www.gis.lu.se/software-test - 2026-10-31
Samples for wood anatomical (species) determination: Object rate (initial fee per object or project) 2500 SEK Additional fee based on number of samples included (typically charcoal or wood fragments): 1-2 samples 500 SEK 3-10 samples 800 SEK >10 samples 1200 SEK Samples for dendrochronological analysis (age determination): Object rate (initial fee per object or project) 6000 SEK Construction timbe
https://www.geology.lu.se/research/laboratories-equipment/laboratory-wood-anatomy-and-dendrochronology/rates - 2026-10-31
Hans Linderson (laboratory manager) Anton Hansson (laboratory assistant) Johannes Edvardsson (researcher) Dan Hammarlund (infrastructure coordinator) Contact Hans Linderson Department of Geology Lunds University Sölvegatan 12 SE-223 62 Lund +46 46 222 7891 hans [dot] linderson [at] geol [dot] lu [dot] se
https://www.geology.lu.se/research/laboratories-equipment/laboratory-wood-anatomy-and-dendrochronology/staff - 2026-10-31
Introduction The Radiocarbon Dating Laboratory in Lund performs dating on geological and archaeological samples. Examples of material that we date are wood, charcoal, peat, macrofossils, bone and marine shells. The analyses are based on Accelerator Mass Spectrometry (AMS). Many radionuclides, such as 3 H, 10 Be, 14 C, 26 Al, 32 Si, 36 Cl, 39 Ar and 81 Kr, are produced naturally in the atmosphere a
https://www.geology.lu.se/lund-university-radiocarbon-dating-laboratory - 2026-10-31
During the autumn of 2004, a new machine for Accelerator Mass Spectrometry was installed at the GeoBiosphere Science Centre. It is a compact machine (ca 6.5 x 4.5 m2) and based on some new technology – ‘Single Stage Accelerator Mass Spectrometry’ (SSAMS). It is used for 14C-dating and for quantification of 14C-labelled substances with applications within radioecology, ecology, medicine and biomedi
https://www.geology.lu.se/research/laboratories-equipment/radiocarbon-dating-laboratory/equipment - 2026-10-31
During 1965-1998, radiocarbon dating in Lund was performed in a conventional laboratory at the Department of Quaternary Geology using two CO2 proportional counters for detection of 14C disintegrations. Dating limit for the equipment was ca 40000 years BP, and the precision for Holocene samples was ± 50 to 80 years. The dating capacity was ca 140 samples/year and around 4200 radiocarbon datings wer
https://www.geology.lu.se/radiocarbon-dating-laboratory-0/history - 2026-10-31
Radiocarbon dating laboratory Raimund Muscheler (PhD, ass. prof., head of laboratory) Mats Rundgren (PhD, ass. prof.) Ingemar Hansson (research engineer) Mattias Olsson (research engineer) Git Klintvik Ahlberg (laboratory assistant) Göran Skog (PhD, ass. prof.) See also: AMS-lab, nuclear physics, Lund University
https://www.geology.lu.se/staff - 2026-10-31
Ass. prof. Mats Rundgren Dept. of Geology Lund University Sölvegatan 12 SE-223 62 Lund Sweden +46 46 222 7856 Mats [dot] Rundgren [at] geol [dot] lu [dot] se Head of laboratory: Ass. prof. Raimund Muscheler Dept. of Geology Lund University Sölvegatan 12 SE-223 62 Lund Sweden +46 46 222 0454 Raimund [dot] Muscheler [at] geol [dot] lu [dot] se Customer inquiries, geological and archaeological sample
https://www.geology.lu.se/contact - 2026-10-31
Introduction The Geology Departments SEM Laboratory consists of a variable pressure Tescan Mira3 High Resolution Schottky FE-SEM equipped with Oxford EDS and EBSD system and a CL system. The instrument allows for: High-resolution imaging in both high- and low-vacuum mode Qualitative and quantitative elemental analyses Qualitative and quantitative line scans and elemental mapping Electron backscatt
Instrument Model: Tescan Mira3 Resolution: 1.0 nm, at 30kV and high vacuum mode Electron source: High brightness Schottky emitter Acceleration voltage: 50V to 30kV Vacuum: high vacuum <9 × 10-3 Pa, low vacuum 7 to 500 Pa. Chamber: Internal diameter: 340 mm (width) × 315 mm (depth) Beam Deceleration Technology (BDT) for resolution at low beam voltages Decontaminator/plasma cleaner Detectors Stand
Samples must be clean with no pieces that can break off and fall down into the microscope vacuum system or fly around in the sample chamber. It is also important that the samples are free of oil and grease. If the microscope is to be used in high vacuum, the sample must be conductive. If the sample itself is not conductive, it must be subjected to a conductive layer. Both coal and gold coating ins
As of 1 January 2026, the Department of Geology is part of the new Department of Earth and Environmental Sciences. This website is no longer being updated and will be phased out. Welcome to our new website: Contact details | Department of Earth and Environmental Sciences Location of the Department Adress Visiting address Geocentrum II Sölvegatan 12 Lund Postal address Dept. of Geology Sölvegatan
https://www.geology.lu.se/about-us/contact-us - 2026-10-31
Without operator With operator Internal: 200 kr/h - External (within LU) 800 kr/h 1800 kr/h External Contact Carl Alwmark Contact Carl Alwmark Carl [dot] alwmark [at] geol [dot] lu [dot] se +46-46-2227871
Why study geology at Lund University The Dept. of Geology at Lund University has a long research tradition. The international aspect of the research activity is accentuated by our participation in many international projects. We are hosting international field courses at both undergraduate and graduate level. In terms of research, we are active on most continents; geology is a global topic on all
https://www.geology.lu.se/education/why-lund - 2026-10-31
The analyses - ways to information about pottery The laboratory for Ceramic Research (KFL) at Lund University has, since the beginning of the seventies, worked with all kinds of ceramic objects from prehistoric and historic contexts not only from Scandinavian countries, but from several other parts of Europe, Africa and South America as well. Fundamental to the work at KFL is the description of pr
https://www.geology.lu.se/research/laboratories-equipment/research-methods - 2026-10-31
Anders Lindahl: publications Thomas Eriksson: publications Paul Eklöv-Pettersson: publications KFL Reports Monographs Published papers before 2006
https://www.geology.lu.se/research/laboratories-equipment/publications-0 - 2026-10-31
Making glazed pottery in a medieval kiln Making Iron in a furnace
https://www.geology.lu.se/research/laboratories-equipment/experiments - 2026-10-31
Head of the laboratory Anders Lindahl (Professor) CV Anders Lindahl Researcher Thomas Eriksson (PhD) PhD Students Katarina Botwid Master students/Research assistants Paul Eklöv Pettersson Erik Johansson Project Collaboration Innocent Pikirayi Edward Matenga Olaf Winter Ole Stilborg CONTACTS Anders Lindahl Thomas Eriksson Map Visiting address Department of Geology Geocentrum II Sölvegatan 12 Lund P
https://www.geology.lu.se/research/laboratories-equipment/contacts-and-map - 2026-10-31
The laboratory is equipped with a Bruker Aurora Elite ICP-MS and a 193 nm Cetac Analyte G2 excimer laser installed with a two volume HelEx2 sample cell . LA-ICP-MS is a powerful method for element analysis in a wide variety of solid materials (i.e. minerals, bone & teeth materials, wood, ceramics, etc.) at spatial resolutions from a few up to several hundred µm. Quantitative analyses can be obtai
Master courses Our MSc. programme has one entry with a suggested study path according to the scheme below. When you are admitted, you are automatically admitted to the first two courses. The first course, Methods in geosciences (GeoM20), is compulsory. However, within the limitations of the degree requirements (see below) – and the periods of the year when the courses are given – you can tailor y
https://www.geology.lu.se/education/programme-structure - 2026-10-31